E2EC-CR8D1 2M
Type: E2EC-CR8D1 2M
Sensing head size
3 dia.
Type
Cylinder type
Shielded
Sensing distance
0.8 mm ±15%
Setting distance
0 to 0.56 mm
Differential distance
10% max. of sensing distance
Sensing object
Ferrous metal (Sensitivity lowers with non-ferrous metals.)
Standard sensing object
Iron 5 x 5 x 1 mm
Response frequency
1.5 kHz (Average value)
Power source
DC 2-wire models
Power supply voltage
12 to 24 VDC (ripple(p-p) 10% max.)
Operating voltage range
10 to 30 VDC
Leakage current
0.8 mA
Control output (Switching capacity)
5 to 100 mA
Control output (Residual voltage)
3 V (Load current 100 mA with cable length of 2 m)
Indicator
Operation indicator (red), Operation setting indicator (green)
Operation mode
NO
Protective circuit
Output short-cut protection, Surge suppressor
Ambient temperature
Operating: -25 to 70 ℃
Storage: -25 to 70 ℃
(no icing)
Ambient humidity
Operating: 35 to 95% RH
Storage: 35 to 95% RH
(no condensation)
Temperature influence
±20% max. of sensing distance in temperature range of -25 to +70 ℃
(As the basis for sensing distance of 23 ℃)
Voltage influence
±2.5% max. of sensing distance in rated voltage range ±15%.
(As the basis for sensing distance at standard power voltage)
Insulation resistance
Between charged parts and the case: 50 MΩ min. at 500 VDC
Dielectric strength
Between charged parts and the case: 1,000 VAC 50/60 Hz for 1 min
Vibration resistance
10 to 55 Hz, 1.5-mm double amplitude each in X, Y, and Z directions for 2 h
Shock resistance
1000 m/s**2 for 10 times each in X, Y, and Z directions
Degree of protection
IEC: IP67
Company standard: Oil-proof (For Sensor Head only)
Connection method
Pre-wired models
(Cable length: 2 m)
Weight (Packed state)
approx. 45 g
Material
Case: Brass
Sensing surface: ABS
Accessories
Instruction manual, Mounting bracket
| Sensing head size | 3 dia. |
|---|---|
| Type | Cylinder type Shielded |
| Sensing distance | 0.8 mm ±15% |
| Setting distance | 0 to 0.56 mm |
| Differential distance | 10% max. of sensing distance |
| Sensing object | Ferrous metal (Sensitivity lowers with non-ferrous metals.) |
| Standard sensing object | Iron 5 x 5 x 1 mm |
| Response frequency | 1.5 kHz (Average value) |
| Power source | DC 2-wire models |
| Power supply voltage | 12 to 24 VDC (ripple(p-p) 10% max.) |
| Operating voltage range | 10 to 30 VDC |
| Leakage current | 0.8 mA |
| Control output (Switching capacity) | 5 to 100 mA |
| Control output (Residual voltage) | 3 V (Load current 100 mA with cable length of 2 m) |
| Indicator | Operation indicator (red), Operation setting indicator (green) |
| Operation mode | NO |
| Protective circuit | Output short-cut protection, Surge suppressor |
| Ambient temperature | Operating: -25 to 70 ℃ Storage: -25 to 70 ℃ (no icing) |
| Ambient humidity | Operating: 35 to 95% RH Storage: 35 to 95% RH (no condensation) |
| Temperature influence | ±20% max. of sensing distance in temperature range of -25 to +70 ℃ (As the basis for sensing distance of 23 ℃) |
| Voltage influence | ±2.5% max. of sensing distance in rated voltage range ±15%. (As the basis for sensing distance at standard power voltage) |
| Insulation resistance | Between charged parts and the case: 50 MΩ min. at 500 VDC |
| Dielectric strength | Between charged parts and the case: 1,000 VAC 50/60 Hz for 1 min |
| Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude each in X, Y, and Z directions for 2 h |
| Shock resistance | 1000 m/s**2 for 10 times each in X, Y, and Z directions |
| Degree of protection | IEC: IP67 Company standard: Oil-proof (For Sensor Head only) |
| Connection method | Pre-wired models (Cable length: 2 m) |
| Weight (Packed state) | approx. 45 g |
| Material | Case: Brass Sensing surface: ABS |
| Accessories | Instruction manual, Mounting bracket |